CSD200 Truck Type Water Well Drilling Rig
CSD200 Multi-functional truck mounted water well drilling rig is a
efficient,multi-function full hydraulic water well drilling rig.It
is high efficiency because of having a larger torque of the
turntable and is mainly used for water well in industry and
agriculture, national defense building foundation, geological
exploration, geothermic well and other foundation working, it is
popular at home and abroad.
CSD200 truck mounted drilling rig can drilling in all kinds
formations by mud drilling in soft formation and air DTH hammer in
rock drilling,DTH Hammer is applied in rock drilling, slag is
discharged by air pressure and the offstage efficiency is ten times
than traditional rotary drilling.
CSD200 deep water well drilling rigs, in cutting drilling or rotary
drilling can be operated in unconsolidated layer, and the slag can
be discharged under by mud, the impact drilling operation can also
be adopted and slag can be discharged by pressure air, the
hydraulic water well drilling rig suitable for drilling complicated
geological conditions.
Specification
| 1 | Geology drilled | | All kinds |
| 2 | Drilling Type | | DTH & Mud Rotary |
| 3 | Drill system and operation | | Hydraulic |
| 4 | Hole Diameter | mm | Φ90—Φ325 |
| 5 | Hole Depth | m | 200 |
| 6 | Rotation Torque | Nm | 4800 |
| 7 | Rotation Speed | rpm | 0-102 |
| 8 | Drill pipe diameter | mm | 76,89,102,114 |
| 9 | Drill pipe length | mm | 3000 |
| 10 | Max. Lifting force | Ton | 12 |
| 11 | Max. Feed Speed | M/min | 18 |
| 12 | Feed Stroke | mm | 3400 |
| Winch |
| 13 | Lifting force of hoist | T | 0.8 |
| 14 | Length of steel wire rope(tool winch) | m | 100 |
| Engine |
| 15 | Diesel Engine type | Yuchai |
| 16 | Rated Horse power | Kw | 81 |
| 17 | Electrical System | V | 24 |
| Compressor required(Optional) |
| 18 | Compressor Type | Rotary Screw/Movable |
| 19 | Pressure Required | Mpa | 1.2—3.0 |
| 20 | Air consumption | m³/min | 11—35 |
| Truck |
| 21 | Manufacturer | | Foton Aoling |
| 24 | Rated Horse power | HP | 168 |
| 25 | Discharge Standard | | EU-5 |
| 26 | Drive type | | 4X2 |
| 27 | Max.Speed | Km/h | 95 |
| 28 | Steering wheel | | left/right(Optional) |
| Mud Pump |
| 29 | Type | | Hydrulic |
| 30 | Model | | BW450 |
| 31 | Stroke | mm | 110 |
| 32 | Displacement | L/Min | 450 |
| 33 | Discharge pressure (Mpa) | Mpa | 5 |
| 34 | Suction tube diameter | mm | 89 |
| 35 | Discharge pipe diameter | mm | 51 |
| 36 | Liner Diameter | mm | 80 |
| Dimension |
| 37 | Net Weight | Kg | 10800 |
| 38 | Shipping Length | mm | 9100 |
| 39 | Shipping Width | mm | 2550 |
| 40 | Shipping Height | mm | 3400 |
Product Show
Characteristics
1. The drilling rig can use air DTH Hammer drilling and mud
drilling.
2. Centralized control console is suitable for each manipulation
and control. Rapid pulling and lifting reduce the auxiliary time
and enhance the work efficiency.
3. The truck chassis adopts the 4X2 or 4x4 special crane chassis of
brand FOTON and the main drive system, the transfer case, gearbox,
double-winch unit, mud pump, turntable,drilling tower, feed system
are set up on the chassis.
4. It's a hydraulicrotary drilling rig with directional
circulation. It is equipped with BW450 mud pump which adopts the
slurry as the washing fluid and can drill on clay, sand and rock if
it is equipped with suitable drilling bit.
5. The power of drilling rig comes from a Yuchai engine,81kw Yuchai
engine drives the large displacement high pressure plunger pump and
it is characterized by powerful dynamic and stable performance.
6. The rotary head,rotation speed is 0-115rpm stepless adjustment
and the rotary torque is 4800Nm.
7. The pulling force can be regulated and controlled, which adapt
the machine to deep hole drilling.
8. It can set up a generator which is convenient to welding or
illuminate for work at night.
9. Main winch are available on the rig so it is high efficiency
when the rig drill on mud rock and on the weathering formation.
10. The main drive of rig is hydrulic and the four landing legs and
drilling tower are hydraulic controlled. Transfer case and mud pump
clutch system are also hydraulic operated.
11. The tools winch winch is used for auxiliary lifting and
casing,optional main winch force of 1.5T, rope length of 100m.
12. The Hydraulic auxiliary functions are easy and efficient for
guide extension, boom swing, boom lift, guide dumping.
13. Competitive in price, low cost of maintain.
Shipping
FAQ
| Q: Are you original manufacturer? | Q: Which payment terms are available to us? | Q: Which Incoterms 2010 terms can we work? |
A: Yes, we JCDRILL is a official leading manufacture in drilling
machinery in China and we have the whole series products you need.
| A: T/T term or L/C term. On T/T term, 30% down payment is required
in advance, and 70% balance shall be settled before shipment. On
L/C term, a 100% irrevocable L/C without "soft clauses" can be
accepted. | A: We JCDRILL are a professional and international company, accept
all Incoterms 2010 terms, normally we work on FOB, CIF, CFR, CIP.
|
| Q: How long will the delivery time take? | Q: How about after sales service? | Q:Spare Parts When You Need Them
|
A: Normally mud pump products will take about 3-15 days to produce
the ordered machines. Most of the time, we can have an immediate
delivery of our regular machines in 15 days.
| A: 365×24 Year-round Service
We are committed to year-round 24-hour service even during
holidays, in line with our policy of always providing "a response
within 15 minutes and job completion within 24 hours." | A:We have spare parts centers across continents that stock
specialist spare parts. We promise that spare parts will be
delivered within 72 hours or no more than one week.
|
Related Products
 |  |  |
CWD200 Crawler Type Water Well Drill Rig | TWD200 Trailer Type Water Well Drill Rig | JXY200 Vertial Water Well Drill Rig |
