H22 Tapered Rock Drill Steel Rod tapered Hexagonal Hollow Steel for
mining drilling in tunning
Tapered drill rod is a further development of the integral drill
rods. It usually has a forged collar to maintain the proper shank
striking face position in the rock drill. Tapered drill rods
effective lengths are measured from the collar to the bit end,which
are usually from 0.6 meters to 3.6 meters.
Hex tapered hollow drill rods for rock drill for jack hammer rock
drill YT24,YT27,YT28,YT29A,S82 etc
Effective lengths: 400mm ~ 8000mm;
Taper degrees: 4°46’, 6°, 7°, 11°, 12°;
Shank sizes: Hex.19mm,Hex. 22mm, Hex.25mm;
Other lengths are available upon request.
1. The ordinary connection taper degree is 7º, 11º and 12º, other
degrees like 4.8º, 6º and 9º are also available upon request;
2. The ordinary shank is Hex22 × 108mm, Hex25 × 159mm and other
styles are also available if upon customers’ request;
3. The rod length must be specified in order;
4. In order to adapt to different rock conditions, the drill rod is selected by users.
Hex22mm / Hex25mm Rock Tapered Drill Rod , Blast Hole Drilling
Tapered Rod
Tapered equipment affords drillers the ability to change drilling
bits whilst still using the same drilling rod. Different taper
sizes have different characteristics when it comes to the
“knock-off” index – the smaller angle will prevent the bit from
spinning.
1. Excellent comprehensive mechanical properties
2. High connection strength and sealability
3. High fatigue strength and long fatigue life
4. Good flushing effect to ensure high drilling rate
5. Steel grade: 95CrMo equivalent to SANDBAR 61.
6. Shank size: hex.22mm×108mm, hex.22mm×159mm.
hex.22mm×80mm, hex.25mm×108mm. hex.25mm×159mm.
7. Taper: 6, 7, 11, 12 degree etc.
8. With highly and strength of resistance on the bending, welding
fixed.
9. Highly efficiency on production and steady quality.
10 It’s able to keep the hole straight and with long use time.
Types of drill rods | Specifications | Length(mm) | Shank | Weight (kg) |
Tapered drill rods | Taper Angle: 4, 6, 7, 11, 12 degree | 400mm to 8000mm | Hex22mm*108mm Hex25mm*159mm Hex19mm*108mm | 1.7 - 24.9 |
Integral drill steel | Bit diameter: 26mm, 28mm, 30mm, 32mm, 34mm, 36mm, 38mm, 40mm, 42mm | 400mm to 4800mm | 3 – 15.4 |
Plug hole rods | Chisel bit diameter: 17mm, 20mm, 22mm | 150mm to 710mm | 0.6 - 2.9 |
Tapered Drill Rod-H22 & H25
In our after sales service system, We establish perfect control
system strictly according to ISO-9000 series, in this system,
technology date and problem solve solution and preventive measures
will be provided in any maintain project, all the spare parts will
be used in new OEM products with installation instructions, packing
list, manufacturer's instruction, qualification and Warranty
certificate.
We provide "one equipment & one case, endless service, namely the
after sales service begin from the order confirmation, last for the
working life of the equipment.
